❞ مذكّرة SLE.Dentistry MCQs Part 1 ❝  ⏤ احمد العوني

❞ مذكّرة SLE.Dentistry MCQs Part 1 ❝ ⏤ احمد العوني

SLE.Dentistry MCQs Part 1

تجميع أسئلة للهيئة (١٤١٠​سؤال) موزعة حسب التخصص
SLE. Dentistry MCQs Part (1) MCQs Review for Saudi Licensing Exam (SLE) TOPIC No of MCQs Operative 200 Periodontics 70 Pedodontics 85 Endodontic 225 Community 85 Radiology 35 Surgery 240 Oral medicine 175 Pharmacology 25 Prosthodontics Fixed 120 Prosthodontics Removable 150 Total 1410 Ahmad AL-Aouni For further information contact with me Twitter & Kik

2 Operative 200 MCQs 1. The following chemically bond to the tooth: A. Composite resin. B. Dental sealants. C. Glass ionomer cement. *** D. All of the above. 2. Compomer restorative materials are: A. Glass ionomer with polymer components B. Resin systems with fluoride containing glasses. *** C. Composite resin for cervical restorations only. The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers. 3. Loose enamel rods at the gingival floor of a class II amalgam cavity should be removed using : A. Straight chisel. B. Hatchet. C. Gingival curetla. D. Gingival marginal trimmer. *** Gingival marginal trimmers are primarily used for beveling gingival margins, and rounding or beveling of the axiopulpal line angle of Class II preparations. The gingival margin trimmer is designed to produce a proper bevel on gingival enamel margins of proximoocclusal preparations. 4. Removal of Undermined Enamel in Class II cavity is done by : A. Chisel. *** B. Angle former C. Excavator PROXIMAL (CLASS II): A chisel can be used to plane away unsupported enamel from the margins of the completed preparation to produce a 90 butt joint. 5. What is the cavo-surface angle of prep for amalgam restoration: A. 30 degree B. 60 degree C. 90 degree *** D. 130 degree. 6. Hand instrument which we used to make internal angles retentive grooves and preparation of cavity walls in the cavity is: E. Angle former. *** F. Chisel. G. File.
H. Enamel hatched.

The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers. احمد العوني - طبيب أسنان، أخصائي تقنية أسنان ❰ له مجموعة من الإنجازات والمؤلفات أبرزها ❞ SLE.Dentistry MCQs Part 1 ❝ ❱
من كتب طب الأسنان - مكتبة كتب الطب.

نبذة عن الكتاب:
SLE.Dentistry MCQs Part 1

SLE.Dentistry MCQs Part 1

تجميع أسئلة للهيئة (١٤١٠​سؤال) موزعة حسب التخصص
SLE. Dentistry MCQs Part (1) MCQs Review for Saudi Licensing Exam (SLE) TOPIC No of MCQs Operative 200 Periodontics 70 Pedodontics 85 Endodontic 225 Community 85 Radiology 35 Surgery 240 Oral medicine 175 Pharmacology 25 Prosthodontics Fixed 120 Prosthodontics Removable 150 Total 1410 Ahmad AL-Aouni For further information contact with me Twitter & Kik

2 Operative 200 MCQs 1. The following chemically bond to the tooth: A. Composite resin. B. Dental sealants. C. Glass ionomer cement. *** D. All of the above. 2. Compomer restorative materials are: A. Glass ionomer with polymer components B. Resin systems with fluoride containing glasses. *** C. Composite resin for cervical restorations only. The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers. 3. Loose enamel rods at the gingival floor of a class II amalgam cavity should be removed using : A. Straight chisel. B. Hatchet. C. Gingival curetla. D. Gingival marginal trimmer. *** Gingival marginal trimmers are primarily used for beveling gingival margins, and rounding or beveling of the axiopulpal line angle of Class II preparations. The gingival margin trimmer is designed to produce a proper bevel on gingival enamel margins of proximoocclusal preparations. 4. Removal of Undermined Enamel in Class II cavity is done by : A. Chisel. *** B. Angle former C. Excavator PROXIMAL (CLASS II): A chisel can be used to plane away unsupported enamel from the margins of the completed preparation to produce a 90 butt joint. 5. What is the cavo-surface angle of prep for amalgam restoration: A. 30 degree B. 60 degree C. 90 degree *** D. 130 degree. 6. Hand instrument which we used to make internal angles retentive grooves and preparation of cavity walls in the cavity is: E. Angle former. *** F. Chisel. G. File.
H. Enamel hatched.

The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers.
.
المزيد..

تعليقات القرّاء:

التعويضات السنية Prosthodontics وتشمل
الجسور الثابتة Fixed bridges والزرعات Implants
الطقوم الكاملة المتحركة removable complete denture
الطقوم الجزئية المتحركة removable partial denture
معالجة و إصلاح الأسنان Operative Dentistry وتشمل:
تشخيص تسوس الأسنان caries diagnosis
الوقايه والحد من انتشار تسوس الاسنان management of dental caries
تبييض الأسنان Dentalbleaching
تجميل الأسنان cosmetic dentistry
حشوات الأسنان Dental Fillings
معالجة لب الأسنان Endodontics
معالجة الأسنان المجهرية microscopic endodontics
طب الأسنان الوقائي Preventive Dentistry
تقويم الأسنان Orthodontics
جراحة الفم والوجه والفكين Oral and Maxillofacial Surgery
طب أسنان الأطفال Pedodontics
أمراض اللثة
أمراض الأنسجة المحيطة بالأسنان Periodontics
زراعة الأسنان Dental Implantology
أشعة الأسنان Dental Radiology
طب الأسنان الشرعي Forensic Dentistry
طب الفم Oral Medicine
أمراض الفم Oral Pathology
أنسجة الفم والأسنان Oral Histology
المادة السنية Dental material
تشريح الأسنانDental anatomy
مواضيع متعلقة بطب الأسنان
طب الأسنان للرضع
جراحة الأسنان
أسنان
طقم أسنان
طب الاسنان في الاردن
طب الأسنان في جميع أنحاء العالم

Transcription. 1 SLE. Dentistry MCQs Part (1) MCQs Review for Saudi Licensing Exam (SLE) TOPIC No of MCQs Operative 200 Periodontics 70 Pedodontics 85 Endodontic 225 Community 85 Radiology 35 Surgery 240 Oral medicine 175 Pharmacology 25 Prosthodontics Fixed 120 Prosthodontics Removable 150 Total ...

SLE.Dentistry MCQs Part 1

SLE. Dentistry MCQs Part (1) MCQs Review for Saudi Licensing Exam (SLE) TOPIC No of MCQs Operative 200 Periodontics 70 Pedodontics 85 Endodontic 225 Community 85 Radiology 35 Surgery 240 Oral medicine 175 Pharmacology 25 Prosthodontics Fixed 120 Prosthodontics Removable 150 Total 1410 Ahmad AL-Aouni For further information contact with me Twitter & Kik

2 Operative 200 MCQs 1. The following chemically bond to the tooth: A. Composite resin. B. Dental sealants. C. Glass ionomer cement. *** D. All of the above. 2. Compomer restorative materials are: A. Glass ionomer with polymer components B. Resin systems with fluoride containing glasses. *** C. Composite resin for cervical restorations only. The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers. 3. Loose enamel rods at the gingival floor of a class II amalgam cavity should be removed using : A. Straight chisel. B. Hatchet. C. Gingival curetla. D. Gingival marginal trimmer. *** Gingival marginal trimmers are primarily used for beveling gingival margins, and rounding or beveling of the axiopulpal line angle of Class II preparations. The gingival margin trimmer is designed to produce a proper bevel on gingival enamel margins of proximoocclusal preparations. 4. Removal of Undermined Enamel in Class II cavity is done by : A. Chisel. *** B. Angle former C. Excavator PROXIMAL (CLASS II): A chisel can be used to plane away unsupported enamel from the margins of the completed preparation to produce a 90 butt joint. 5. What is the cavo-surface angle of prep for amalgam restoration: A. 30 degree B. 60 degree C. 90 degree *** D. 130 degree. 6. Hand instrument which we used to make internal angles retentive grooves and preparation of cavity walls in the cavity is: E. Angle former. *** F. Chisel. G. File. H. Enamel hatched.

The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers.

The composition of compomers is similar to that of a dental composite however it has been modified, making it a polyacid-modified composite. This results in compomers still requiring a bonding system to bond to tooth tissue. Although the name compomer implies that the material possesses a combination of characteristics of both composite and glass ionomers, these materials are essentially polymer-based composites that have been slightly modified to take advantages of the potential fluoride-releasing behavior of glass ionomers.
 

 كتب طب اسنان
كتب طبية باللغة العربية pdf
كتب طب اسنان مترجمة
كتب تقويم اسنان بالعربي
كتب طب الاسنان في مصر
كتب طب اسنان بالعربي pdf
البسيط في تقويم الأسنان pdf
كتب طب اسنان سنة اولى
تحميل كتب في تقويم الاسنان



حجم الكتاب عند التحميل : 6 ميجا بايت .
نوع الكتاب : pdf.
عداد القراءة: عدد قراءة SLE.Dentistry MCQs Part 1

اذا اعجبك الكتاب فضلاً اضغط على أعجبني
و يمكنك تحميله من هنا:

تحميل SLE.Dentistry MCQs Part 1
شكرًا لمساهمتكم

شكراً لمساهمتكم معنا في الإرتقاء بمستوى المكتبة ، يمكنكم االتبليغ عن اخطاء او سوء اختيار للكتب وتصنيفها ومحتواها ، أو كتاب يُمنع نشره ، او محمي بحقوق طبع ونشر ، فضلاً قم بالتبليغ عن الكتاب المُخالف:

برنامج تشغيل ملفات pdfقبل تحميل الكتاب ..
يجب ان يتوفر لديكم برنامج تشغيل وقراءة ملفات pdf
يمكن تحميلة من هنا 'http://get.adobe.com/reader/'

المؤلف:
احمد العوني - Ahmad AL Aouni

كتب احمد العوني طبيب أسنان، أخصائي تقنية أسنان ❰ له مجموعة من الإنجازات والمؤلفات أبرزها ❞ SLE.Dentistry MCQs Part 1 ❝ ❱. المزيد..

كتب احمد العوني